Betaflex PRO Flexo System Analyzer for
HD FLEXO & MORE!
The Precise & Productive Tool for Today’s Flexo
The Problem: Process variability, uncertain results, wasted material
The Solution: The Betaflex PRO system simplifies process control with a familiar interface, unparalleled accuracy, and a powerful toolbox of functions.
The Benefits: Detect process variation before expensive errors propagate through the system. Automatic data collection, plotting, and statistical analysis keeps the operator informed and the process on target.
The new Betaflex Pro system operates at the highest resolution to provide the most accurate and consistent measurements. HD Flexo, stochastic screening, and all the most sophisticated prepress techniques can be measured and controlled with ease and accuracy.
Revolutionary 3D imaging and DOT STRUCTURE Mode add togographical visualization to the conventional
dot area halftone measurements.
Dot height, diameter, slope and more are visualized and automatically measured at 22,000 PPI.
Surface enhancement techniques are easily seen and quantified.
Color Separation Analysis from Printed Halftones
Essential for Dot Area Analysis for Printing without Targets such as pharmaceutical, cosmetic or any printing where there is no trim area for targets.
Separated and analyzed for true halftone dot area analysis & correction. Good for gray balance control.
The new high resolution system is portable and easy to use. Operating in TRANSMISSION mode at 14,000 PPI, it quickly and accurately measures all types of transparent flexo plates, digital ablation masks, and halftone films. The new Mask Stain Density function eliminates the need to carry an old fashioned film densitometer to verify laser energy, focus, and beam adjustments.
In PRINT mode color separation imaging of offset plates and color prints on film and paper measures Dot Area, Screen Ruling, Edge Factor and more. Data and images are easily captured and printed with the integral report generator and statistical analyzer.
Image Comparison function automatically rotates, scales and overlays images to display and measure differences in dot area. See dot size, change from mask to plate to print, plant to plant, or week to week. See changes in the process or materials, the plant or the method before expensive errors propagate through the system.
Bar Width Analysis with automatic edge detection eliminates operator error and measures in compliance with industry standards.
Request a free Demo Version of the Betaflex PRO Software
The new automatic 4 point calibration system eliminates the need to make multiple manual measurements. The Calibration Target and software system maintains a database of instrument status to satisfy the most stringent ISO registration requirements. All of this is combined with the high precision, ease of use, and Beta product support that has made Betaflex the standard for Flexo Quality Control.
- Measure flexo plates, films, and digital masks in conventional 2D mode
- Dot Structure Analysis in 3D mode reveals dot height, slope, and more
- Print mode measures true mechanical dot area on offset plates and prints
- Automatic 4 point calibration system with ISO-compliant target
- Mask Stain density function for laser ablation setup
- Image Overlay and Comparison function to visualize and measure dot changes
Optional Accessories for the Betaflex Pro:
Click to download accessories brochure
Betaflex Pro XXL (Long Arm Adaptor) - $4,600
For large plates.
Mounts Betaflex Pro sensor head & Flexi-Gage 30 inches into the plate. Mask, plate and print halftone analysis as well as plate thickness and relief measurements with optional Flexi-Gage micrometer.
Betaflex Pro Sleeve Adaptor - $8,000
Add the benefits of Betaflex Pro to the efficiency of sleeve production
Dual transmission illuminators produce sharp, high-contrast images for accurate halftone dot analysis.
Provides precise alignment of sensor to sleeve surface
Convenient working position on standard table height.
Includes powered USB hub and cable management system
- Two collimated transmission light sources, one near each end of the sleeve support
- White, Red, Green and Blue reflection light sources mounted within the sensor
- 3D mode illuminator mounted within the sensor
Cut off: 12” to 49” (300mm - 1250mm)
Diameter: 3.75” to 15.7” (95.5mm - 398mm)
Width: Maximum 80” (2000mm)
FlexoEye PLUS Software - $1,499
Streamlined automatic data collector & report generator
Optional software data collector and report generator guides the operator to collect just the halftone data needed in a high volume production environment.
No unnecessary steps and no obstacles to high production. Convenient PASS/FAIL icons evaluate minimum dot and midtone dot while plotting the day’s production on a convenient graph.
FlexiGage Micrometer ($1,850) & Roll Mount ($900).
Measure plate thickness and wear - generate reports, too
The mechanical attributes of plate gauge and relief of thermal, aqueous, solvent, and direct ablation plates can now be added to the FlexoEye PLUS reports through a direct connection to the
FLEXI-GAGE DIGITAL MICROMETER.
Use your existing plate gauge table or ours with our convenient Digital Micrometer to measure, record, and plot plate thickness.
Not limited to flat plates, the Betaflex PRO sensor can be mounted on the optional Betaflex Sleeve Adaptor to measure translucent sleeves in 2D and 3D mode.
Handling sleeves up to 80 inches wide and 16.7 inches in diameter. Measure sleeve gauge and relief with the Flexo-Gage option mounted on the sleeve adapter for total Quality Control.
The Betaflex Pro ROLL MOUNT makes it possible to document plate wear and damage while the plate is still on press. The Betaflex Pro sensor attaches to the Roll Mount, stabilizing the sensor on a stationary plate cylinder for 3D mode measurements. Web print samples can also be imaged on a stationary web over a turning bar or flat area.
Flexi-Gage for Betaflex Pro Sleeve Adaptor - $2,500