|
Introducing...
The Betaflex E3 Flexo Sleeve, Plate, and Film
Analyzer, high resolution halftone analysis.
Fast, accurate, and portable, the hand held device measures all types of photopolymer and elastomeric sleeves and plates, including steel-backed plates and direct-engraved cylinders. Laser ablation masks, plates, and halftone films are evaluated for dot area, ruling, and dot quality more accurately than possible with a densitometer.
Use it as a standalone to measure plates, prints, and films of any size or with the Sleeve Adaptor to measure sleeves in the round.
MEASURES:
Photopolymer Sleeves and Plates for Dot Area
Screen Ruling
Bar Code Width and more
Verify plate quality before mounting or releasing them to the press room. Save time, material and money by catching errors early in the process.
Media Compatibility:
Flexo and Letterpress Plates and Sleeves
Transparent and Steel-backed Plates
Solvent, Aqueous and Thermal Washout Masks
Film Neg./Pos.
Halftone Proofs and Prints
Special Offer:
Includes BetaColor Viewer III - the Most Successful and Important Pressroom Instrument since the Densitometer.
- See the nearly invisible yellow as clearly as the black.
- Color separation LED illumination increases the contrast of process colors.
- Achieve faster makeready, better register, and higher quality.
The BetaColor Viewer III normally sells for $439, but it’s included at no charge with any Betaflex system.
System Specifications
Field of View: 7 mm
Dot Analysis: Area, Perimeter, Screen Ruling, Edge Factor
Selectable Region of Interest: 25%, 50%, 80% of frame
Imager: Color CCD
Sensor: 3 megapixel
Resolution: 8 pixels/micron
Interface: USB 2.0
Transfer Mode: ActiveSync
Calibration Factory calibrated
Dimensions & Weight: 8” x 4” x 3”, 1.4 lbs
PC System Requirements
Processor - Pentium 1Ghz or equivalent
Memory - 256MB or more
Disk Space - 25MB minimum
Interface - 2 x USB
CD-ROM
Powered USB hub if used with a laptop computer
|
DOWNLOAD:
E3 Brochure
E3 Manual
- Catch imaging errors early in the workflow
- Check film, mask, and plate calibration quickly and easily
- Verify dot size, screen ruling, and barcode geometry
- Document outgoing jobs to improve communications
- Check customer’s print quality to improve fingerprint results
- Never lose press time because of bad incoming plates
- Inspect plates and sleeves on press for wear and defects
- Capture print image to analyze print quality and register
- Measure image geometry in barcodes, traps, reverses
- Document print quality and defects for repeat jobs
Available on a free 10 day trial in the U.S. & Canada
Call for details: 1-800-272-7336
Get Adobe Acrobat Reader
To view the Brochure or the Manual you will need Adobe Acrobat Reader,
available for free from Adobe. Click the icon below to get Acrobat Reader now.
|
